User Guide

170 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FLAG-x-575: This owner was not found.
Source: FLAG.EXE
Possible Cause: The owner specified is not a user on the network.
Action: Make sure that the user typed the owner's name correctly. Make sure that the
owner that the user specified is a current user on the network.
FLAG-x-625: This utility was unable to allocate the volume handle.
Source: FLAG.EXE
Possible Cause: The client workstation is not attached to a server
Action: If the user is using a server version prior to NetWare 4, make sure the client
workstation is attached to the desired server. If the user is using a NetWare 4
or later version server, make sure the client workstation has a drive mapped to
volume and server or to the volume object.
Possible Cause: The volume is not mounted or does not exist.
Action: Make sure that the volume is mounted and that the user typed the volume
name correctly.
FLAG-x-650: This utility cannot assign volume attributes in v2.x.
Source: FLAG.EXE
Action: When using a NetWare 2 server, do not set volume attributes.
FLAG-x-673: This utility was unable to get the connection information.
Source: FLAG.EXE
Action: Retry the command. If the problem persists, contact a Novell
®
support
provider.
FLAG-x-675: This utility was unable to change the volume attributes.
Source: FLAG.EXE
Explanation: Your user account must have the Supervisor or Access Control right to change
attributes.
Action: Find out what the user's account rights are at the volume level by using the
RIGHTS utility. If appropriate, make sure the user has the Supervisor or
Access Control rights. After the user's rights are assessed and reassigned if
necessary, try the command again.