User Guide

FLAG Messages 173
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
FLAG-x-877: The Compress attribute is supported only with NetWare v4.x
Source: FLAG.EXE
Explanation: The user tried to set the Immediate Compress or Don't Compress attribute on
a server that is not a NetWare 4 server.
Action: If the server is not a NetWare 4 server, do not use the Immediate Compress or
Don't Compress attribute.
FLAG-x-878: You cannot set both the Immediate Compress and Don't Compress
attributes.
Source: FLAG.EXE
Possible Cause: The user tried to set both the Immediate Compress file attribute and the Don't
Compress file attribute. These two file attributes cannot both be set at the same
time.
Action: Decide whether the file should be compressed or not compressed; then use the
appropriate flag.
FLAG-x-879: Migration is not enabled on the server.
Source: FLAG.EXE
Possible Cause: The user tried to use the Migration capability on a server that is not currently
supporting migration.
Action: Verify the Migration status on the server. If the problem persists, contact a
Novell
®
support provider.
FLAG-x-880: Compression is not enabled on the server.
Source: FLAG.EXE
Possible Cause: The user tried to use the Compression capability on a server that is not
currently supporting compression.
Action: Verify the Compression status on the server. If the problem persists, contact a
Novell support provider.
FLAG-x-901: You are not attached to the specified server.
Source: FLAG.EXE
Action: See message “901: You are not attached to the specified server.” on page 775