User Guide

198 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
IDEATA.HAM–005: Exceeded the number of allowed load instances
Source: IDEATA.HAM
Explanation: This informational message means that you tried to load the .ham driver more
times than allowed. The IDEATA.HAM driver can be loaded four times,
which corresponds to the number of I/O channels currently supported in the
IDE/ATA specification.
IDEATA.HAM–006: Insufficient memory to allocate during initialization
Source: IDEATA.HAM
Possible Cause: There is insufficient memory to load and run the driver.
Action: Unload any unnecessary NLM programs and try to reload the driver.
IDEATA.HAM–007: Invalid NWPA handle
Source: IDEATA.HAM
Possible Cause: The driver is being passed a bad handle from the NWPA.
Action: Contact Novell Technical Support.
IDEATA.HAM–008: None of the parameters matched the known resources
Source: IDEATA.HAM
Possible Cause: The load instance failed because the necessary hardware resources (port and
interrupt values) for configuring the .ham driver were not specified on the
command line.
Action: Reload the driver and specify the appropriate hardware resources.
IDEATA.HAM–009: Device not found at the specified port address
Source: IDEATA.HAM
Possible Cause: The driver failed to load because it did not detect any devices at the specified
port address.
Action: Determine the correct port address and reload the driver using this value.