User Guide

IDEATA.HAM Messages 199
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
IDEATA.HAM–010: Load failed due to hardware resource conflict
Source: IDEATA.HAM
Possible Cause: The driver could not be loaded because some other driver has reserved one or
all of the hardware resources (port or interrupt) specified for this driver.
Action: Resolve the resource conflict between the competing controllers and reload
the driver.
IDEATA.HAM–011: I/O channel registration failed
Source: IDEATA.HAM
Possible Cause: The driver failed to load because channel registration with the server failed.
Action: Unload any unnecessary .cdm and .ham drivers, then reload the driver.
IDEATA.HAM–012: Memory allocation error. The driver was unable to allocate an IO
buffer to scan PCI configuration space. The driver needs to scan configuration space
to avoid unsupported controllers.
Source: IDEATA.HAM
Possible Cause: There is insufficient memory to load the driver.
Action: Unload any unnecessary NLM programs and try to reload the driver.
IDEATA.HAM–013: A CMD CSA640B ATA/IDE controller is present, so only a single
IDE channel will be supported. Please ensure all IDE devices are attached to the same
channel prior to loading the driver.
Source: IDEATA.HAM
Explanation: This is a warning message that the driver cannot be loaded more than once
because it detected the presence of a CMD CSA640B controller, which only
allows communication with one of its channels safely in NetWare.
Action: Be sure all IDE devices are attached to the same channel, then reload the
server and drivers.