User Guide

208 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
IPXS-X-10: Error number was returned while trying to open filename; unable to
configure RIP, SAP or IPX.
Source: IPXS.NLM
Explanation: The error specified was returned when IPXS attempted to open the file
containing the RIP, SAP, or IPX configuration information. Configuration of
RIP, SAP, or IPX was not accomplished.
Action: If the problem persists, contact a Novell support provider.
IPXS-X-12: Unable to configure IPX for number open IPX sockets, IPXS not loaded.
Source: IPXS.NLM
Explanation: The ipx_init function was unable to configure IPX for the indicated number of
IPX open sockets.
Action: Try the operation again. If the problem persists, contact a Novell support
provider.
IPXS-X-13: Unable to configure IPXS for number open IPX sockets, IPXS not loaded.
Source: IPXS.NLM
Explanation: The ipx_init function was unable to configure IPX for the indicated number of
IPX open sockets.
Action: Try the operation again. If the problem persists, contact a Novell support
provider.
IPXS-X-14: Invalid format in file name; unable to configure RIP, SAP or IPX.
Source: IPXS.NLM
Explanation: IPXS cannot configure RIP, SAP, or IPX due to an incorrect configuration file
format.
Possible Cause: The configuration file is corrupted.
Action: Run MONITOR to regenerate the file.
IPXS-X-15: Invalid format in file name; unable to configure IPX.
Source: IPXS.NLM
Explanation: IPXS cannot configure IPX due to an incorrect configuration file format.
Possible Cause: The configuration file is corrupted.
Action: Run MONITOR to regenerate the file.