User Guide

216 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Possible Cause: The network board settings are not the defaults, and they are not defined in the
NET.CFG file.
Action: If the jumper settings are not the defaults, make sure that they match the
settings in the NET.CFG file.
Action: If the computer is not using the NET.CFG file, make sure the jumper settings
are set to the defaults.
Possible Cause: The network board is does not work.
Action: Replace the network board with one that you know works.
Action: If the computer is using a microchannel network board, the network board is
not in the computer, or the network board's configuration could not be
obtained, do the following:
 Make sure that the network board is properly seated into a slot.
 Insert the network board into a slot, and run the Reference diskette to
install it.
LANSUP-DOS-X-051: Board RAM failed the memory test.
Source: LANSUP.COM
Explanation: The memory test on the network board's internal static RAM failed.
Action: Check the network board and other hardware. If necessary, replace the
network board.