User Guide

Lib0 Messages 223
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Lib0 Messages
The following includes messages from LIB0.NLM.
Lib0-X-001: It was not possible to register NLMs with Network management. There
may be no NetWare management agent present.
Source: LIB0.NLM
Explanation: The Network Management agent (an NLMTM program running on the server)
responsible for gathering statistics on a software module was not available or
did not respond to the lib0 program's attempt to register. The lib0 program will
continue to perform correctly, although Network Management will be unable
to gather statistics on it.
Action: Use a different version of this NLMTM program. To get a different version,
contact the vendor of this NLM program, or contact a Novell support provider.
Lib0-X-002: Lib0 failed to create call gates in support of user address spaces under
NetWare with memory protection. Lib0 will still support other NLMs, but no NLMs can
be loaded in protected domain until Lib0 is unloaded and reloaded without this
message appearing. Contact your Novell software distributor.
Source: LIB0.NLM
Explanation: This message appears if the operating system is NetWare 4.11, which does not
support memory protection. It can also appear if certain functions that
normally run in protected memory could not be registered or if system
memory is low.
Action: Load NLMs in the kernel address space, instead of in a protected address
space. Check server memory and add more memory if necessary. If the
operating system is NetWare 5 or later and server memory is adequate, contact
a Novell Authorized Reseller or Novell Technical Support.