User Guide

224 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Lib0-X-003: RegisterTrackedResource() for BSD Sockets failed, rc=number. An
internal system error has occurred. There may not be enough server memory, or
server memory may be corrupted.
Source: LIB0.NLM
Explanation: A call to RegisterTrackedResource() failed. The LIB0.NLM program cannot
load at this time due to memory constraints.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
Lib0-X-004: Unable to register console command (name).
Source: LIB0.NLM
Explanation: Lib0 could not register a console command with the server operating system,
probably because memory is low. If memory is adequate, there might be a
problem with the operating system.
Action: Check server memory. If necessary, increase the memory available to the
server. (See Freeing Server Memory Temporarily in the Server Operating
System Administration Guide.) If memory is adequate, contact a Novell
Authorized Reseller or Novell Technical Support.
Lib0-X-081: Lib0 failed to allocate the internal memory resource tag for the Berkeley
Sockets Mutexes. There may not be enough server memory, or server memory may
be corrupted.
Source: LIB0.NLM
Explanation: System resources are so low that the library could not provide the needed
memory resource tag.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
Lib0-X-082: Lib0 failed to initialize the Berkeley Socket mutexes. An internal system
error has occurred.
Source: LIB0.NLM
Explanation: System resources are so low that the library could not provide the needed
memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.