User Guide

LOGIN Messages 239
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
LOGIN-X-630: The NetWare shell is not loaded.
Source: LOGIN.EXE
Possible Cause: The user tried to log in to a server without loading the NetWare NETX or
VLM bindery shell into the workstation's memory. When the workstation is
booted, DOS is loaded into the workstation's memory. The NetWare shell is
then loaded on top of DOS. The shell allows the workstation to communicate
with the server. A user cannot log in to any server on the network unless the
NetWare shell has been loaded into the workstation's memory.
Action: Give the user a boot diskette that contains both DOS and the NetWare shell
files. Then ask the user to try rebooting the workstation and logging in again.
If the error persists, the boot diskette may be corrupted.
LOGIN-X-640: Server name is part of domain name. This version of LOGIN is not a
NetWare Name Service utility and cannot synchronize passwords in a domain. Use
the NetWare Name Service utility SETPASS to change your password.
Source: LOGIN.EXE
Possible Cause: LOGIN found that a server the user is attached to is a NetWare Name Service
server. This LOGIN version cannot handle NetWare Name Service's
synchronization of passwords.
Action: Use a NetWare Name Service (NNS) version of SETPASS to synchronize
passwords.
LOGIN-X-650: The COMSPEC variable is not supported on this platform.
Source: LOGIN.EXE
Possible Cause: The login script contains a COMSPEC variable.
Action: Do not use the COMSPEC command in the login script when using this
platform.
LOGIN-X-660: The DOS BREAK command is not supported on this platform.
Source: LOGIN.EXE
Possible Cause: The login script contains a BREAK variable. BREAK is not supported on this
platform, only in DOS.
Action: Do not use the BREAK command in the login script when using this platform.