User Guide

MAP Messages 267
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
MAP-X-860: You are trying to login during an unauthorized time period. The
supervisor has limited the time period during which you can log in to this server.
Source: MAP.EXE
Possible Cause: The network supervisor has set specific time periods when the user can use the
server. The user cannot use the server until the next authorized time period.
Action: Notify the user of the restricted time periods.
MAP-X-870: An unknown error was returned during MAP's attempt to attach. (code)
Source: MAP.EXE
Possible Cause: An error occurred that the operating system cannot identify. The error number
is identified by code. This usually indicates that the server is servicing the
maximum number of logged-in users it can accommodate with its memory.
Action: Ask some users to log out. If the error persists, record the error value and
contact a Novell support provider. For information about a specific error code,
search the Error Codes online documentation (http://www.novell.com/
documentation/lg/nwec/docui/index.htm).
MAP-X-890: The specified server is unknown.
Source: MAP.EXE
Possible Cause: The user mistyped the name of the server, specified a server that is not on the
network, or specified a server that is down.
Action: Using an applicable utility, such as NLIST or NetWare Adminisitrator, list the
servers that the station recognizes. Type the name of the server correctly. If the
server is down, try the command when the server has been brought back up.
If the problem persists, contact a Novell support provider.
MAP-X-903: The command line syntax is invalid. For help, type MAP /?
Source: MAP.EXE
Action: See message “903: The command line syntax is invalid.” on page 775
MAP-X-905: This utility was unable to initialize the country information.
Source: MAP.EXE
Action: See message “905: This utility was unable to initialize the country
information.” on page 775