User Guide

278 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Action: Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
NDPSM-X-104: Error <code> occurred while creating the NDPS Manager database.
Source: NDPSM.NLM
Explanation: NDPS Manager was unable to create the database because an error code was
returned.
Possible Cause: This could be a problem in the program itself.
Action: For information about the specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
NDPSM-X-105: Error <code> occurred while changing job storage volume.
Source: NDPSM.NLM
Possible Cause: NDPS Manager was unable to change the job storage volume due to error
code.
Action: For information about the specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM-X-106: Insufficient memory is available to initialize the NDPS Manager.
Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
NDPSM-X-107: The NDPS Manager is unable to prompt for a password. This is usually
due to a low memory condition.
Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.