User Guide

NDPSM Messages 279
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NDPSM-X-108: Error <code> occurred while attaching to queues associated with
printer <printer_name>.
Source: NDPSM.NLM
Possible Cause: An internal error stopped the NDPS Manager from attaching to the queue that
is associated with the specified printer.
Action: For information about the specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM-X-109: The NDPS Manager is unable to create the queue polling process. This
is usually due to a low memory condition.
Source: NDPSM.NLM
Action: Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
NDPSM-X-114: There was not enough room on volume <volume_name> to transfer
the jobs. The operation was aborted.
Source: NDPSM.NLM
Possible Cause: NDPS Manager was unable to transfer the print jobs to volume volume_name
because of a temporary lack of disk space.
Action: Try the task again. You might need to free up some space on the volume.
NDPSM-X-116: The Gateway bound to this Printer Agent has refused the request to
rename the Printer Agent. It will be necessary to unload the Gateway in order to
rename this Printer Agent.
Source: NDPSM.NLM
Possible Cause: Some gateways have an internal dependency on the Printer Agent name that
existed when the gateway bound to the Printer Agent. It will refuse a rename
request for the Printer Agent while it continues to be bound to that Printer
Agent.
Action: Unload the gateway and rename the Printer Agent, then load the gateway
again. (You can do this from the command line.)