User Guide

296 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NDPSM-X-350: The NDPS Manager does not support autoloading of port handlers on
SFT III servers. This must be done from the system console.
Source: NDPSM.NLM
Action: SFT III is not supported by NDPS.
NDPSM-X-351: Error <code> occurred while creating the portal.
Source: NDPSM.NLM
Possible Cause: The server is out of memory.
Action: Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see Freeing Server Memory
Temporarily in the Server Operating System Administration Guide. For
information about the specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM-X-358: Error <code> occurred while saving a backup of the NDPS Manager
database files.
Source: NDPSM.NLM
Possible Cause: A file I/O error has probably occurred.
Action: For information about the specific error code, search the Error Codes online
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm). If you are unable to resolve the error, contact your Novell support
provider.
NDPSM-X-366: The NDPS Manager is unable to automatically back up its database.
Source: NDPSM.NLM
Possible Cause: The server is out of memory.
Action: Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.