User Guide

NDPSM Messages 299
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NDPSM-X-401: The object <name> that was selected is not an NDPS Manager.
Source: NDPSM.NLM
Possible Cause: This error may simply be the result of a typing mistake made by the user at the
command line. It could also occur if the eDirectory volume object associated
with the NDPS Manager has been deleted, in which case eDirectory will
change the NDPS Manager to an "unknown object."
Action: Make sure you have typed the command correctly. If this is not the problem
and the volume has been deleted, you will need to associate an NDPS Manager
with an existing volume and re-create the printers that were assigned to it.
NDPSM-X-402: The NDPS Manager was unable to initialize the <protocol_name>
protocol.
Source: NDPSM.NLM
Possible Cause: The protocol stack did not initialize. Your server could have insufficient
memory, or there could be a problem with the protocol stack itself.
Action: Make sure the server has sufficient memory, then retry the operation. For
information on resolving memory problems, see Freeing Server Memory
Temporarily in the Server Operating System Administration Guide. If memory
is not the problem, refer to the documentation for the protocol stack for
troubleshooting or debugging information.