User Guide

318 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
091: The hardware configuration conflicts.
Source: NE3200-NW.LAN
Action: See message “091: The hardware configuration conflicts.” on page 766
092: Cannot schedule AES without an HSM routine.
Source: NE3200-NW.LAN
Action: See message “092: Cannot schedule AES without an HSM routine.” on page
767
093: Cannot schedule interrupt time call back without an HSM routine.
Source: NE3200-NW.LAN
Action: See message “093: Cannot schedule interrupt time call back without an HSM
routine.” on page 767
094: Cannot set hardware interrupt without an HSM routine.
Source: NE3200-NW.LAN
Action: See message “094: Cannot set hardware interrupt without an HSM routine.”
on page 767
095: Cannot add polling without an HSM routine.
Source: NE3200-NW.LAN
Action: See message “095: Cannot add polling without an HSM routine.” on page 767
236: No RCBs are available for the board to initialize.
Source: NE3200-NW.LAN
Possible Cause: The computer could not initially allocate Receive Control Blocks for this
network board
Action: Set the minimum packet receive buffers (in STARTUP.NCF) to a higher
number.
237: The firmware cannot be initialized.
Source: NE3200-NW.LAN
Possible Cause: The network board did not inform the host that it was alive after it was reset.