User Guide

324 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NLMLib-X-023: An invalid namespace was specified using the /N option. Only the
namespace strings DOS, MAC, NFS, FTAM and OS2 are valid.
Source: NLMLIB.NLM
Explanation: You specified an invalid namespace with the /N option.
Action: Try again, using valid namespace syntax. If the problem persists, contact the
vendor of this NLM program or contact a NetWare support provider.
NLMLib-X-024: Login using the /S option loading the NLM failed: rc = number. An
incorrect username or password may have been used in the login process.
Source: NLMLIB.NLM
Explanation: This message might appear because an incorrect username or password was
used. This error also might appear because of a hardware, cabling, or
insufficient memory problem.
Action: Try the login again, making sure the username and password are valid. Check
the hardware and cabling.
If the error occurs due to a memory problem on the server, increase the
memory available to the server. See Freeing Server Memory Temporarily in
the Server Operating System Administration Guide.
If the problem persists, contact the vendor of this NLM program or contact a
NetWare support provider.
NLMLib-X-026: Select() overflow detected.
Source: NLMLIB.NLM
Explanation: NetWare detected a potential overflow but averted it.
Action: This message is for information only.