User Guide

348 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-19: Volume name name must be at least two characters long.
Source: NWCONFIG.NLM
Explanation: A volume name was entered which was shorter than two characters.
Action: Enter a name at least two characters long.
NWCONFIG-X-20: A volume was found with an invalid volume block size of number
KB.
Source: NWCONFIG.NLM
Explanation: An invalid volume has been found. This volume has become corrupted.
Action: Delete the volume. If the data is required, restore it from backups. If the
problem persists, contact a Novell support provider.
NWCONFIG-X-21: A volume was found with an invalid number of volume segments
(number). Check to be sure all disk drivers are configured properly.
Source: NWCONFIG.NLM
Explanation: An invalid volume has been found. This volume has become corrupted.
Action: Delete the volume. If the data is required, restore it from backups. If the
problem persists, contact a Novell support provider.
NWCONFIG-X-22: A volume was found with an invalid volume segment position
number of number segments. Check to be sure all disk drivers are configured
properly.
Source: NWCONFIG.NLM
Explanation: An invalid volume has been found. This volume has become corrupted.
Action: Delete the volume. If the data is required, restore it from backups. If the
problem persists, contact a Novell support provider.
NWCONFIG-X-23: A volume was found with an invalid starting sector offset of
number on a drive of size number sectors. Check to be sure all disk drivers are
configured properly.
Source: NWCONFIG.NLM
Explanation: An invalid volume has been found. This volume has become corrupted.
Action: Delete the volume. If the data is required, restore it from backups. If the
problem persists, contact a Novell support provider.