User Guide

NWCONFIG Messages 353
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-41: The program could not read the mirror FAT entry from a volume.
Source: NWCONFIG.NLM
Explanation: NWCONFIG could not read from the volume.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.
NWCONFIG-X-42: An error occurred while writing name FAT block sequence number.
Source: NWCONFIG.NLM
Explanation: NWCONFIG could not write to the volume.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.
NWCONFIG-X-43: The program could not find a free block to which to redirect the FAT
block.
Source: NWCONFIG.NLM
Explanation: The volume might be full or the drive parameters might not be set up correctly.
This message could also indicate a bug in the program.
Action: If possible, try specifying a larger volume size. Also check the drive
parameters. If the problem persists, contact a Novell support provider.
44: End of file was encountered unexpectedly in the FAT file, FAT chain, sequence
number number.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.
45: The program could not find a free block during file system directory block
allocation.
Source: NWCONFIG.NLM
Explanation: The volume might be full or the drive parameters might not be set up correctly.
This message could also indicate a bug in the program.
Action: If possible, try specifying a larger volume size. Also check the drive
parameters. If the problem persists, contact a Novell support provider.