User Guide

354 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-46: The program could not allocate memory for the file system
directory table.
Source: NWCONFIG.NLM
Explanation: There is insufficient memory to accomplish the desired operation.
Action: See Freeing Server Memory Temporarily in the Server Operating System
Administration Guide.
NWCONFIG-X-47: An error occurred while writing name file system directory block
sequence number.
Source: NWCONFIG.NLM
Explanation: NWCONFIG could not write to the volume. This could indicate an internal
system error.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide..
NWCONFIG-X-48: The program could not find a free block to redirect the file system
directory block to.
Source: NWCONFIG.NLM
Explanation: The volume might be full or the drive parameters might not be set up correctly.
This message could also indicate a bug in the program.
Action: If possible, try specifying a larger volume size. Also check the drive
parameters. If the problem persists, contact a Novell support provider.
NWCONFIG-X-49: End of file was encountered unexpectedly in the system directory
file, FAT chain at sequence number.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-50: An attempt to read a primary file system directory entry failed.
Source: NWCONFIG.NLM
Explanation: An error occurred when the program attempted to read a volume.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.