User Guide

NWCONFIG Messages 359
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-73: Two segments with volume name name were found having different
block shift factors (number and number).
Source: NWCONFIG.NLM
Explanation: Two volumes with the same name exist, but their block sizes differ.
Action: Bring the disks that contain these volumes online one at a time, rather than at
the same time. If one of the volumes is old and no longer needed, delete it to
avoid the problem in the future. Two volumes on the same server cannot have
the same name.
NWCONFIG-X-74: A resource tag could not be allocated.
Source: NWCONFIG.NLM
Explanation: This error is probably caused by insufficient memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
NWCONFIG-X-75: Error number was returned by the AppendMultiEditText() function.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-76: Error number was returned by the MultiEditText function.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-77: An invalid parameter was passed to a function at address address.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.