User Guide

364 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-102: Abend: An error occurred in the in FAT entry sequence of last
mirror FAT block.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred. The installation process has terminated
prematurely, and NWCONFIG will be unloaded.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-103: Abend: The previous volume segment could not be found.
Source: NWCONFIG.NLM
Explanation: NWCONFIG could not read from the disk. The proper disk driver might not
be loaded, the cabling might not be correct, or the drive parameters might be
set incorrectly.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.
NWCONFIG-X-104: Abend: An invalid volume segment was found in the disk segment
list.
Source: NWCONFIG.NLM
Explanation: Either part of a volume is missing, or the volume segment is corrupted. The
remainder of the volume might be offline.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.
NWCONFIG-X-106: The operation aborted because CLIB.NLM could not be loaded.
Source: NWCONFIG.NLM
Explanation: CLIB.NLM could not be loaded. This could be caused by insufficient memory
or conflicts with exported functions.
Action: The system console screen should indicate the cause of CLIB not being
loaded. Examine this screen to determine the necessary steps for resolving the
conflict. If the problem is due to insufficient memory, increase the memory
available to the server. See Freeing Server Memory Temporarily in the Server
Operating System Administration Guide. If the problem persists, contact a
Novell support provider.