User Guide

NWCONFIG Messages 367
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-117: A memory corruption problem has occurred. Program operation
cannot continue.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred. The installation process has terminated
prematurely, and NWCONFIG will be unloaded.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-118: An attempt to free unallocated memory has failed. Program
operation cannot continue.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred. The installation process has terminated
prematurely, and NWCONFIG will be unloaded.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-121: The Wait message is too large to be displayed.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-124: Warning: The disk partition cannot be locked because it is
currently being used by another process. A mounted volume may be using it. The
partition cannot be modified at this time.
Source: NWCONFIG.NLM
Action: Wait to see if the process releases the device, then retry the action. If there is
a disk device error, unload NLM programs (except device drivers) that might
be using the disk. Then dismount volumes from the disk. If these efforts fail,
try loading MONITOR, deleting all user connections, and disabling logins.
NWCONFIG-X-126: The option failed.
Source: NWCONFIG.NLM
Explanation: This is an internal error probably caused by insufficient memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.