User Guide

376 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-172: The selected disk cannot be tested at this time. Insufficient
memory is available to begin another test.
Source: NWCONFIG.NLM
Explanation: Either a previous test is being conducted on the disk, or the server does not
have enough memory.
Action: Wait until a previous test is completed. If necessary, increase the memory
available to the server. See Freeing Server Memory Temporarily in the Server
Operating System Administration Guide.
NWCONFIG-X-174: The drive is not currently being tested.
Source: NWCONFIG.NLM
Explanation: You tried to stop a test that was not being conducted.
Action: Make sure that the correct drive is selected.
NWCONFIG-X-175: Disk surface testing is currently being done. If you leave
NWCONFIG, the testing will be terminated.
Source: NWCONFIG.NLM
Explanation: You tried to leave NWCONFIG during a surface test.
Action: Wait until surface testing is completed.
NWCONFIG-X-176: Hot Fix is not currently installed on the selected disk. Hot Fix
needs to be installed for this function.
Source: NWCONFIG.NLM
Explanation: There is no Hot Fix redirection area on the NetWare partition, or there might
be no NetWare partition at all.
Action: If there is no NetWare partition, create a NetWare partition from free space.
Be sure to specify a Hot Fix redirection area when you create the partition. If
there is a NetWare partition, but no Hot Fix redirection area, you can add a Hot
Fix redirection area, but you must delete the volumes on the partition. Back up
volume data to another device, delete the volumes, create the Hot Fix
redirection area, then re-create the volumes and restore the data.