User Guide

NWCONFIG Messages 377
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-178: Two volume segments with the same sync value have
mismatched data. message
Source: NWCONFIG.NLM
Explanation: NWCONFIG found multiple instances of the same volume. This probably
occurred because two physical disks each contain a volume with the same
name.
Action: Because each volume on a given server must have a unique name, take one of
the physical disks offline. You might have to delete one of the volumes and
then bring the disks online simultaneously.
NWCONFIG-X-179: Volume segment entry number on disk_description is invalid:
reason Check to be sure all disk drivers are loaded and configured properly.
Source: NWCONFIG.NLM
Explanation: A segment of a volume is corrupted.
Action: See Disk Errors in the Server Operating System Administration Guide. You
might have to re-create the volume.
NWCONFIG-X-180: Warning: An overlapping segment entry was found starting at
sector number on name for volume name segment number. Check to be sure all disk
drivers are configured properly, and that multiple volumes do not have the same
name.
Source: NWCONFIG.NLM
Explanation: Disk data might be corrupted, or an internal error might have occurred.
Action: See Disk Errors in the Server Operating System Administration Guide. If the
problem persists, contact a Novell support provider.
NWCONFIG-X-181: A mirror mismatch was detected for FAT block sequence number.
Source: NWCONFIG.NLM
Explanation: Errors have occurred in the volume structure.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.