User Guide

378 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-182: A FAT table length error has occurred on volume name. There
should be number FAT blocks, but the FAT table length is number blocks.
Source: NWCONFIG.NLM
Explanation: Errors have occurred in the volume structure.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.
NWCONFIG-X-183: The volume cannot be locked at this time because another
process is using it. Perhaps a surface test is being performed. The selected action
cannot be completed.
Source: NWCONFIG.NLM
Action: Wait to see if the process releases the device, then retry the action. If there is
a disk device error, unload NLM programs (except device drivers) that might
be using the disk. Then dismount volumes from the disk. If these efforts fail,
try loading MONITOR, deleting all user connections, and disabling logins.
NWCONFIG-X-184: A mirror mismatch was detected for file system directory block
sequence number.
Source: NWCONFIG.NLM
Explanation: Errors have occurred in the file system.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.
NWCONFIG-X-185: Volume definition tables on disk_description are out of sync.
Source: NWCONFIG.NLM
Explanation: A disk corruption error has occurred.
Action: See Disk Errors in the Server Operating System Administration Guide.
NWCONFIG-X-186: Drive name is unusable.
Source: NWCONFIG.NLM
Explanation: Four attempts were made to read information on the drive and all failed.
Action: See Disk Errors in the Server Operating System Administration Guide.