User Guide

NWCONFIG Messages 379
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-187: Warning: The name of volume old_name was changed to both
new_name and second_new_name.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Contact a Novell support provider.
NWCONFIG-X-188: Warning: The name of volume old_name was changed to
new_name and the name of volume old_name was changed to new_name.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Try again. If the problem persists, contact a Novell support provider.
NWCONFIG-X-189: Warning: Volume name has multiple sync definitions. (Multiple
volumes have the same name.) All definitions except number have been discarded.
Source: NWCONFIG.NLM
Explanation: More than one volume was found with the same name. All definitions but one
were removed from memory. The volumes are still intact on disk.
Action: Because each volume on a given server must have a unique name, take one of
the physical disks offline. You might have to delete one of the volumes and
then bring the disks online simultaneously.
NWCONFIG-X-190: Volume name has invalid segment number. This may be due to
multiple volumes having the same name, or one or more drivers not being loaded and
configured properly.
Source: NWCONFIG.NLM
Explanation: A volume segment was discovered that is either corrupted or is only a part of
a complete volume.
Action: Make sure that all segments of the volume are online and drivers are
configured correctly. If this does not solve the problem, see Disk Errors in the
Server Operating System Administration Guide.