User Guide

380 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-191: Two or more volume were found which have the same name.
(Volume name has multiple definitions for segment number.) This could be due to
formerly mirrored volumes being synchronized separately, then brought online
together. If this is the case, unload the drivers or take the server down, and then bring
the separate disks online one at a time. Rename the redundant volumes as they are
brought online, so that there is not a name conflict.
Source: NWCONFIG.NLM
Explanation: More than one volume was found with the same name.
Action: Because each volume on a given server must have a unique name, take one of
the physical disks offline. You might have to delete one of the volumes and
then bring the disks online simultaneously.
NWCONFIG-X-192: Warning: Volume name is missing segment number. Check to be
sure all disk drivers are loaded and configured properly.
Source: NWCONFIG.NLM
Explanation: An incomplete volume has been discovered. A segment is missing.
Action: Make sure that all segments of the volume are online. Make sure disk drivers
are configured correctly. Troubleshoot the disk. See Disk Errors in the Server
Operating System Administration Guide.
NWCONFIG-X-193: A volume segment mismatch has occurred. Volume name
segment number ends at block number, and segment number starts at block number.
Check to be sure all disk drivers are loaded and configured properly, and that multiple
volumes do not have the same name.
Source: NWCONFIG.NLM
Explanation: Volume segments were discovered that are inconsistent or corrupted.
Action: Make sure that all segments of the volume are online, volume names are
unique, and all disk drivers are configured correctly. See Disk Errors in the
Server Operating System Administration Guide. You might have to delete and
re-create all volumes.