User Guide

382 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-198: The definition for sync (or instance) number of volume name was
removed.
Source: NWCONFIG.NLM
Explanation: Multiple volumes with the same name were found. One of them was discarded
from memory. The data is still intact on disk.
Action: Because each volume on a given server must have a unique name, take one of
the physical disks offline. You might have to delete one of the volumes and
then bring the disks online simultaneously.
NWCONFIG-X-199: Volume name sync (or instance) number was not found in the
volume's sync list.
Source: NWCONFIG.NLM
Explanation: An internal system error has occurred.
Action: Contact a Novell support provider.
NWCONFIG-X-200: Name change update for volume old_name to new_name is being
completed.
Source: NWCONFIG.NLM
Explanation: The volume name has been changed.
Action: None. This message is for information only.
NWCONFIG-X-207: The name name is reserved and cannot be used for a volume.
Source: NWCONFIG.NLM
Explanation: A volume name was entered that is reserved and cannot be used. The names
currently reserved are PIPE and CON.
Action: Choose a different name.
NWCONFIG-X-208: The volume definition table on name has invalid entries. Check to
be sure all disk drivers are loaded and configured properly.
Source: NWCONFIG.NLM
Explanation: The data on the disk is corrupted or unreadable.
Action: A confirmation question will follow this message. Choosing to fix the volume
definition table will destroy the invalid entries. If you think that valid data
exists on the volumes in question, do not fix the table. See Disk Errors in the
Server Operating System Administration Guide.