User Guide

NWCONFIG Messages 385
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-220: The partition table on drive number appears to be invalid. It is
possible that you have not chosen the correct driver. If valid data does exist on this
drive, and you do not want it destroyed, indicate No in the Confirm box that follows
this message.
Warning: If you indicate Yes to recreating the partition table, all existing partitions
(DOS partitions, NetWare partitions, etc.) will be deleted and all existing disk data will
be lost.
Source: NWCONFIG.NLM
Explanation: The operating system has determined that the partition table is invalid and
cannot be recovered.
Action: Follow the directions in the warning message. Answering Yes to the
confirmation question will create a new disk partition and destroy all data on
the old partition.
NWCONFIG-X-221: This disk partition is out of date with respect to other mirror
groups and must be resynchronized before it can be used.
Source: NWCONFIG.NLM
Explanation: The disk partition cannot be accessed because it is not synchronized.
Action: Resynchronize the disk partition by using F3 in the mirror list.
NWCONFIG-X-225: This segment exists on disk. Its size cannot be modified unless
you delete and reassign it.
Source: NWCONFIG.NLM
Explanation: You are in the Volume Disk Segment List and are trying to edit the size or
name of a segment that is already assigned.
Action: To rename a segment, go to the volume list and edit the volume parameters,
changing the volume name.
NWCONFIG-X-226: The system volume (SYS:) does not exist. Installation cannot be
completed without it.
Source: NWCONFIG.NLM
Explanation: System volume SYS: must be mounted before NWCONFIG.NLM can be
used.
Action: Mount the SYS: volume.