User Guide

NWCONFIG Messages 387
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-234: The name volume_name already exists in the segments list.
Source: NWCONFIG.NLM
Explanation: The volume name that the segment is being assigned to already exists.
Action: Choose a new name.
NWCONFIG-X-235: File name cannot be opened. Error: description.
Source: NWCONFIG.NLM
Explanation: This error could result from inadequate disk space on a NetWare volume or
from a corrupted diskette.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide. If the error occurred while accessing a diskette, make
sure all files can be read from a workstation. If the problem persists, contact a
Novell support provider.
NWCONFIG-X-236: The maximum number of segments on this disk has been
reached. If you want to add a new segment, first delete another segment.
Source: NWCONFIG.NLM
Explanation: Only one NetWare disk partition can exist on a given disk, and only eight
segments can exist on a given disk partition. The disk already has eight
segments on it.
Action: Delete a segment before creating a new one.
NWCONFIG-X-239: The disk (logical partition number) is locked and cannot be
accessed because another process is using it.
Source: NWCONFIG.NLM
Explanation: Another process or NLM is using the disk partition.
Action: Wait to see if the process releases the device then retry the action. If there is a
disk device error, unload NLM programs (except device drivers) that might be
using the disk and dismount volumes from the disk. If these efforts fail, try
loading MONITOR, deleting all user connections, and disabling logins.