User Guide

388 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-240: Volume name cannot be locked because another process is using
it. Volume configuration cannot proceed.
Source: NWCONFIG.NLM
Explanation: Another process or NLM is using the volume.
Action: Wait to see if the process releases the device then retry the action. If there is a
disk device error, unload NLM programs (except device drivers) that might be
using the disk and dismount volumes from the disk. If these efforts fail, try
loading MONITOR, deleting all user connections, and disabling logins.
NWCONFIG-X-242: File name cannot be read. Error: description.
Source: NWCONFIG.NLM
Explanation: This error could result from inadequate disk space or from other I/O errors.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide. If the error occurred while accessing a diskette, make
sure all files can be read from a workstation. If not, contact a Novell support
provider.
NWCONFIG-X-243: The system volume is too small (number MB, number sectors). It
should be at least number MB (number sectors).
Source: NWCONFIG.NLM
Explanation: The SYS: volume created is less than 25 MB. It should be at least 25 MB.
Action: If possible, make SYS: at least 25 MB. If this cannot be done, continue with
the installation.
NWCONFIG-X-244: The path you specified corresponds to a remote server and is not
supported.
Source: NWCONFIG.NLM
Explanation: You entered a remote server path. Remote paths are not supported.
Action: Enter a local path.