User Guide

390 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-249: NLM_name did not finish unloading in the time allowed (number
seconds). Control will be switched to the system console screen, where you may
either see it finish or enter information to finish loading it.
Source: NWCONFIG.NLM
Explanation: The specified NLM did not unload in the time allotted. You might have to
enter information to complete the unload process.
Action: To view the system console screen and see if an error occurred, or to enter
information, press Enter. If no error has occurred, proceed normally.
NWCONFIG-X-250: NLM_name did not unload. Control will be switched to the system
console screen, where you may see the error.
Source: NWCONFIG.NLM
Explanation: The specified NLM failed to unload.
Action: To view the system console screen and determine what error has occurred,
press Enter.
NWCONFIG-X-252: Directory directory_name cannot be created. Error: description.
Source: NWCONFIG.NLM
Explanation: The specified directory could not be created.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide.
NWCONFIG-X-254: Directory name cannot be removed. Error: description.
Source: NWCONFIG.NLM
Explanation: The directory is in use or is not empty.
Action: Make sure that the directory is empty before trying to remove it.
NWCONFIG-X-256: NetWare path path is invalid. Specify a fixed or diskette drive path.
Source: NWCONFIG.NLM
Explanation: NetWare paths cannot be used for this operation.
Action: Specify a drive path for a diskette or fixed disk.