User Guide

NWCONFIG Messages 393
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-267: Directory path path either is invalid or does not contain the
desired file (name).
Source: NWCONFIG.NLM
Explanation: The specified path does not exist, does not contain the file, or contains invalid
characters.
Action: Enter a valid path.
NWCONFIG-X-268: The specified directory path is invalid. Press F3 (or F4 if
applicable) and enter a new path.
Source: NWCONFIG.NLM
Explanation: The specified path either does not exist or contains invalid characters.
Action: Enter a valid path.
NWCONFIG-X-269: The system volume (SYS:) either is not mounted or does not exist.
Source: NWCONFIG.NLM
Explanation: The SYS: volume is either not mounted or not visible to NWCONFIG.
Action: Make sure that the volume is mounted, that all the necessary disk drivers are
loaded, and that the disk is powered on. See Resolving Volume I/O Errors in
the Traditional File Services Administration Guide..
NWCONFIG-X-270: The system volume (name:) is not mounted.
Source: NWCONFIG.NLM
Explanation: You cannot use NWCONFIG.NLM until you have mounted the system
volume.
Action: Mount the volume. Do this at the system console by entering MOUNT
volume_name.
NWCONFIG-X-271: The limit (number) for the number of volumes that may be
mounted at one time has been reached on this server. Dismount another volume
before you mount this one.
Source: NWCONFIG.NLM
Action: Follow the suggestions in the message.