User Guide

394 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-272: One or more partitions on drive number are inconsistent with the
driver geometries (number heads, number sectors, and number cylinders) that
NetWare is using. You may continue and edit the partitions anyway, although this
inconsistency could create problems later on.
Source: NWCONFIG.NLM
Explanation: The size of the partition is not an even multiple of the number of heads,
sectors, and cylinders on the drive.
Action: Although it is possible to continue with the editing, it would be better to re-
create the offending partition consistent with the driver geometry that
NetWare is using.
NWCONFIG-X-273: Volume name name already exists. Choose a different name.
Source: NWCONFIG.NLM
Explanation: The volume name displayed in the message already exists.
Action: Choose a different volume name.
NWCONFIG-X-274: Some disk partitions already exist. NWCONFIG will delete them
(including the files, user data, etc.) and create new ones if you confirm Yes in the box
that follows this message. Active (bootable) partitions, such as the DOS boot
partition, will not be deleted, even if you confirm Yes. WARNING: To preserve the data
in non-active partitions, confirm No.
Source: NWCONFIG.NLM
Explanation: Unless you specify otherwise, NWCONFIG will delete all nonbootable DOS
partitions and use the largest area of free space to create a NetWare disk
partition.
Action: If you want the partitions deleted, confirm with Yes; otherwise respond No.
NWCONFIG-X-275: No ending signature (`DRIVER DESCRIPTION END') was found in
file name. The file was ignored.
Source: NWCONFIG.NLM
Explanation: The file is probably corrupted or out of date.
Action: If you need this file, replace it with a version that is current and not corrupted.