User Guide

396 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-283: The command line string for driver name was too long and could
not be generated.
Source: NWCONFIG.NLM
Explanation: NWCONFIG has a limited buffer for generating a command line to use when
loading driver files. The parameters you desire require a command line longer
than NWCONFIG can generate.
Action: Load the driver from the system console, providing the parameters by hand.
NWCONFIG-X-284: A value must be entered for parameter name. Enter a value before
you load the driver.
Source: NWCONFIG.NLM
Explanation: The specified parameter requires a value as in the example below:
NET=01240000
Action: Specify the proper value for the parameter.
NWCONFIG-X-285: Value value cannot be interpreted.
Source: NWCONFIG.NLM
Explanation: The specified value has no meaning to NWCONFIG.
Action: Supply a valid value as indicated in the documentation for the indicated
product.
NWCONFIG-X-286: Value value is already in use. Choose another one.
Source: NWCONFIG.NLM
Explanation: The value specified is already in use.
Action: Choose another value (for example, a different interrupt number).
NWCONFIG-X-287: Recoverable parameter dependency errors occurred with
parameter value. You may continue anyway.
Source: NWCONFIG.NLM
Explanation: The value you supplied for a parameter required another parameter that was
not supplied.
Action: None. This message is for information only. NWCONFIG was able to recover
from the error.