User Guide

NWCONFIG Messages 397
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-288: A recoverable initialization problem occurred with parameter
value. You may continue anyway.
Source: NWCONFIG.NLM
Explanation: The value supplied for a parameter caused a problem, but NWCONFIG was
able to recover from the error.
Action: None. This message is for information only. NWCONFIG was able to recover
from the error.
NWCONFIG-X-289: Value value is not in the list of acceptable values.
Source: NWCONFIG.NLM
Explanation: An invalid value was entered.
Action: Enter an acceptable value.
NWCONFIG-X-290: Value value is not within the range specified for this parameter.
Source: NWCONFIG.NLM
Explanation: An invalid value was entered.
Action: Enter an acceptable value.
NWCONFIG-X-293: Driver name did not unload correctly. Control will be switched to
the system console screen where you may see the error.
Source: NWCONFIG.NLM
Explanation: NWCONFIG was unable to determine the cause of the failure to unload.
Action: Switch to the system console screen, where a message will be displayed by the
NetWare server indicating the reason the driver did not unload. Correct the
problem indicated by the server, and retry the operation.
NWCONFIG-X-297: Driver name was successfully unloaded. Press Enter to continue.
Source: NWCONFIG.NLM
Explanation: This alert is for information only.
Action: None. This message is for information only.