User Guide

404 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-327: Context name could not be created. Verify that the context path is
entered correctly and that object name has supervisor rights on the parent of the new
context in eDirectory. Also, if you entered the context name manually, make sure it
follows all the proper containment and syntax rules for a valid full context
specification.
Source: NWCONFIG.NLM
Explanation: NWCONFIG could not determine the reason that the context could not be
created.
Action: Make sure that the context name follows all syntax rules as indicated in
documentation for Novell eDirectory.
NWCONFIG-X-328: Another object with name name already exists at context context.
This server cannot be installed at that context. Either (1) specify a different context
for this server or (2) from a workstation, delete or rename the conflicting object.
Source: NWCONFIG.NLM
Action: Follow the instructions on the screen.
NWCONFIG-X-331: The password was retyped incorrectly. Re-enter the password.
Source: NWCONFIG.NLM
Action: Retype the new password correctly to confirm it.
NWCONFIG-X-332: User object name could not be authenticated. Verify that the
complete name is entered correctly and that you have the correct password.
Source: NWCONFIG.NLM
Explanation: An invalid object name or password was entered.
Action: Enter the complete name correctly. If the problem persists, contact a Novell
support provider.
NWCONFIG-X-333: Warning: An attempt to log in to Novell eDirectory failed, because
the server context is not known. eDirectory may be uninitialized, removed, or
corrupted.
Source: NWCONFIG.NLM
Explanation: NWCONFIG was unable to determine the server context.
Action: Execute DSREPAIR; then install or reinstall Novell eDirectory.