User Guide

406 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-340: There are users logged into this server. Remove all user
connections and try to install Novell eDirectory again.
Source: NWCONFIG.NLM
Explanation: You cannot install Novell eDirectory while users are logged in to the server.
Action: Clear the users’ connections and retry the operation.
NWCONFIG-X-341: A console command (command) did not finish executing in the
time allowed (number seconds). Control will be switched to the system console
screen, where you must finish it manually.
Source: NWCONFIG.NLM
Explanation: The reason the command did not completely execute will be shown on the
system console screen.
Action: After correcting the problem, finish the command on the system console
screen; then return to NWCONFIG.
NWCONFIG-X-342: To see a list of existing objects in Novell eDirectory (countries,
organizations, divisions, etc.) when you press Enter, you must first authenticate to
eDirectory. To authenticate, you must (1) enter the administrator name, and (2) enter
the correct password. (Note that if you type the country and company or organization
name, a default administrator name will be created for you.)
Source: NWCONFIG.NLM
Action: To see the list, follow the instructions in the message.
NWCONFIG-X-343: NWCONFIG cannot lock the root directory entry for volume name.
Some other process is modifying it.
Source: NWCONFIG.NLM
Explanation: Only one process at a time can modify the root directory entry.
Action: Wait until the other process finishes. If it takes more than a couple of hours,
contact a Novell support provider.
NWCONFIG-X-345: The program was unable to initialize NWSNUT.NLM.
Source: NWCONFIG.NLM
Explanation: The support NLM, NWSNUT, returned an error from the initialization
process. This could be an internal error, or it could be caused by insufficient
memory.