User Guide

NWCONFIG Messages 411
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-365: The Directory ID cannot be removed from volume name.
Source: NWCONFIG.NLM
Explanation: An internal error occurred which prevented clearing of an ID field on the
volume. Perhaps the volume is read-only.
Action: Contact a Novell support provider.
NWCONFIG-X-366: A virtual device does not have a mirror set that can be displayed
or modified.
Source: NWCONFIG.NLM
Explanation: An attempt was made to view the set of mirrored devices corresponding to a
virtual device. A virtual device is a device that does not use standard NetWare
device partitioning, mirroring, and Hot Fix. The device is registered with
NetWare as a logical partition only.
Action: Do not attempt to view the mirrored set, etc. corresponding to this device.
NWCONFIG-X-389: An NCP Server object (or an unknown object) with name name
already exists at context context.
Source: NWCONFIG.NLM
Explanation: All objects of the same type must have unique names within a directory tree
context. There is an existing Server object with the same name and in the same
context as one that is being added.
Action: Change the context or name of the new or existing Server object.
NWCONFIG-X-392: The program cannot allocate a semaphore.
Source: NWCONFIG.NLM
Explanation: This error is probably caused by insufficient memory.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
NWCONFIG-X-393: The attempt to log in to server name by user username failed.
Error: number
Source: NWCONFIG.NLM
Action: Check the conditions listed in the message and verify that all are correct. To
review information for the error code number, see Error Codes in the online
documentation.