User Guide

NWCONFIG Messages 413
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-405: No disk drivers were found by this program; it could not complete
auto mirroring.
Source: NWCONFIG.NLM
Explanation: The disk driver has been unloaded, or a major internal error has occurred.
Action: Backup and reload disk drivers. If the problem persists, contact a Novell
support provider.
NWCONFIG-X-406: This program could not find the other IO engine; it could not
complete auto mirroring.
Source: NWCONFIG.NLM
Explanation: Communication between the two IO engines has stopped. This could be
caused by faulty network boards connecting the two computers, a break in the
communication cable, or the other computer being down.
Action: Check the items listed above, then reboot and reinstall. If the problem persists,
contact a Novell support provider.
NWCONFIG-X-407: An attempt by this program to allocate memory failed; auto
mirroring could not be completed.
Source: NWCONFIG.NLM
Explanation: This program could not allocate required memory to complete auto mirroring.
Action: Increase the memory available to the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
NWCONFIG-X-408: This program was unable to get disk driver information; it could
not complete auto mirroring.
Source: NWCONFIG.NLM
Explanation: The disk driver has been unloaded or there is a major internal error.
Action: Back up and reload disk drivers. If the problem persists, contact a Novell
support provider.
NWCONFIG-X-409: This program was unable to get partition information; it could not
complete auto mirroring.
Source: NWCONFIG.NLM
Explanation: This program is no longer able to see the hard disk.