User Guide

416 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Action: Verify that you are doing what you want done. Back up any needed data from
the new server's NetWare volume; then go to the Create Partition screen and
delete and re-create the offending partition.
NWCONFIG-X-419: The original server's NetWare partition is orphaned, cloned or
non-operational. This program did not complete auto mirroring.
Source: NWCONFIG.NLM
Explanation: There is a problem reading the original server's NetWare partition.
Action: Make sure that the correct disk driver is loaded. Select the Manual partition
option and resynchronize the mirrored group.
NWCONFIG-X-420: The original server's NetWare partition is already mirrored. This
program did not complete auto mirroring.
Source: NWCONFIG.NLM
Explanation: The program thinks that the original server's NetWare partition is already
mirrored.
Action: The mirror group should be deleted, re-created and mirrored.
NWCONFIG-X-421: This program could not add a partition to a mirror group; it could
not complete auto mirroring.
Source: NWCONFIG.NLM
Explanation: An internal processing error exists.
Action: Make sure that the correct disk driver is loaded. Retry the operation. If the
problem persists, contact a Novell support provider.
NWCONFIG-X-422: This program could not set partition HotFix; it could not complete
auto mirroring.
Source: NWCONFIG.NLM
Explanation: There is an internal processing error.
Action: Make sure that the correct disk driver is loaded. Retry the operation. If the
problem persists, contact a Novell support provider.