User Guide

418 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-428: Warning: You do not have LAN drivers loaded on both server
computers. You need to load the proper LAN drivers to complete the installation.
Source: NWCONFIG.NLM
Explanation: The server communicates with the network card through a LAN driver.
Installation could continue, but communication with other servers will not
exist until a LAN driver is loaded.
Action: Load the correct LAN driver on both computers.
NWCONFIG-X-429: You cannot edit/modify the parameters of a currently loaded
driver. If you must modify the parameters, unload the driver and reload it.
Source: NWCONFIG.NLM
Action: If the parameters need to be changed, unload the driver and reload it, changing
the parameters as needed.
NWCONFIG-X-432: Warning: For NetWare for OS/2, you need at least one LAN driver
and also a shared LAN driver (TOKENSHR, etc). You need the LAN driver to complete
the installation, and the shared driver to see the network from OS/2.
Source: NWCONFIG.NLM
Explanation: If you are sharing a network board between the server and the client, you will
need to load at least two LAN drivers. One LAN driver will be a sharing driver
which will allow the client to have access to the network. The other LAN
driver will be the driver for the installed network board. You might have
multiple real LAN drivers, one for each network board, but only one sharing
driver.
Action: If you are sharing a network board with the client, load the preselected sharing
driver (TOKENSHR, TOKENLNK, or LANSHARE) and the LAN drivers
corresponding to the installed network boards. If you are not sharing a
network board, load only the LAN drivers corresponding to the installed
network boards.
NWCONFIG-X-433: Warning: You do not have a shared LAN driver loaded. You need
to choose the proper shared driver for OS/2 to see the network.
Source: NWCONFIG.NLM
Explanation: If you are sharing a network board between the server and the client, you will
need to load both a real and a sharing LAN driver. The real LAN driver allows