User Guide

NWCONFIG Messages 419
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
the server to see the network, and the shared LAN driver allows the client to
see the network.
Action: Load the correct sharing LAN driver. There is a line in the CONFIG.SYS file
that loads the corresponding sharing driver on the client (TOKENSHR,
TOKENLNK, or LANSHARE).
NWCONFIG-X-434: Some NetWare disk partitions already exist. NWCONFIG will
delete them (including the files, user data, etc.) and create new ones if you confirm
Yes in the box that follows this message. Only NetWare (not DOS or other) partitions
will be deleted if you confirm Yes.
WARNING: To preserve the data on existing NetWare partitions, confirm No.
Source: NWCONFIG.NLM
Action: Make sure no data will be lost if you confirm Yes to this box. When a disk
partition is deleted all data on that partition is lost. If you wish to delete the
partition, answer Yes. Otherwise, answer No.
NWCONFIG-X-435: Warning: You had TCP/IP configured on the original server. You
will need to load INETCFG.NLM after the installation is completed, and then re-install
TCP/IP support.
Source: NWCONFIG.NLM
Explanation: The TCP/IP installation and configuration has been changed in this version of
NetWare.
Action: Follow the instructions in the message.
NWCONFIG-X-436: Warning: You had APPLETALK configured on the original server.
You will need to load INETCFG.NLM after the install is completed, and then re-install
APPLETALK support.
Source: NWCONFIG.NLM
Explanation: The APPLETALK installation and configuration has been changed in this
version of NetWare.
Action: Follow the instructions in the message.