User Guide

420 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-438: Some NetWare disk partitions already exist on the new server
computer. NWCONFIG will delete them (including the files, user data, etc.) and create
new ones if you confirm Yes in the box that follows this message. Only NetWare (not
DOS or other) partitions on the new computer will be deleted if you confirm Yes.
WARNING: To preserve the data on existing NetWare partitions on the new computer,
confirm No.
Source: NWCONFIG.NLM
Explanation: Make sure no data will be lost if you confirm Yes to this box. When a disk
partition is deleted, all data on that partition is lost.
Action: If you wish to delete the partition, answer Yes. Otherwise, answer No.
NWCONFIG-X-442: A user name is required to log in to the remote server.
Source: NWCONFIG.NLM
Explanation: Both a user name and a password are required to log in to a server.
Action: Enter the appropriate user name.
NWCONFIG-X-446: Warning: The system volume (SYS:) is not mounted, and driver
load and bind commands cannot be added to the system configuration files (and
therefore will not take effect after rebooting).
Source: NWCONFIG.NLM
Action: to make sure the driver load and bind commands are added, mount the system
volume and create the .NCF files.
NWCONFIG-X-450: Warning: A file that is being installed would overwrite existing file
name. It probably should not be overwritten.
However, in the confirm box that follows, you may continue and overwrite this file
anyway, if you wish to.
Source: NWCONFIG.NLM
Explanation: An existing file on the server is about to be overwritten.
Action: Check the dates on both the existing file and new file. Determine whether the
file should be overwritten, and then answer the confirmation box accordingly.