User Guide

NWCONFIG Messages 425
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-469: The organization name must have at least 1 character.
Source: NWCONFIG.NLM
Explanation: This message is for information only.
NWCONFIG-X-471: User Admin for organization name could not be authenticated.
Verify that you have the correct password.
Source: NWCONFIG.NLM
Explanation: The correct password for the Admin user in the given organization is required
for authentication.
Action: Enter the correct password for the Admin user.
NWCONFIG-X-477: Warning: An attempt to open configuration file STARTUP.NCF
failed. Error code: code
You may still configure drivers, but later you will have to manually add the LOAD
commands to the configuration file if you want the driver LOAD operations to remain
after the server reboots.
Source: NWCONFIG.NLM
Explanation: Due to an internal error, the load commands will not be automatically inserted
into the STARTUP.NCF file.
Action: See Resolving Volume I/O Errors in the Traditional File Services
Administration Guide. You can also do as the message states and manually
edit the STARTUP.NCFfile by loading NWCONFIG and selecting NCF File
Options > Edit STARTUP.NCF File.
NWCONFIG-X-478: Warning: An attempt to open configuration files IOSTART.NCF
and MSSTART.NCF failed. Error code: code.
You may still configure drivers, but later you will have to manually add the LOAD
commands to the configuration file if you want the driver LOAD operations to remain
after the server reboots.
Source: NWCONFIG.NLM
Action: See Resolving File I/O Errors in the Traditional File Services Administration
Guide.