User Guide

426 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-479: Warning: An attempt to open configuration file AUTOEXEC.NCF
failed. This may be due to volume SYS: being dismounted or inaccessible.
You may still configure drivers, but later you will have to manually add the LOAD
commands to the configuration file if you want the driver LOAD operations to remain
after the server reboots.
Source: NWCONFIG.NLM
Explanation: Due to an internal error, the load commands will not be automatically inserted
into the AUTOEXEC.NCF file.
Action: See Resolving File I/O Errors in the Traditional File Services Administration
Guide. You can also do as the message states and manually edit the
AUTOEXEC.NCF file by loading NWCONFIG and selecting NCF File
Options > Edit AUTOEXEC.NCF File.
NWCONFIG-X-480: Warning: An attempt to open configuration files IOAUTO.NCF and
MSAUTO.NCF failed. Error code: code
You may still configure drivers, but later you will have to manually add the LOAD
commands to the configuration file if you want the driver LOAD operations to remain
after the server reboots.
Source: NWCONFIG.NLM
Action: See Resolving File I/O Errors in the Traditional File Services Administration
Guide. You can also do as the message states and manually edit the
IOAUTO.NCF and MSAUTO.NCF files by loading NWCONFIG and
selecting Maintenance/Selective Install.
NWCONFIG-X-481: The NetWare/IP product environment could not be set up. The
reason could be that CLIB.NLM or BTRIEVE.NLM did not load. Refer to the NetWare
system console for the actual reason.
Source: NWCONFIG.NLM
Action: Refer to the NetWare system console screen for the reason the NetWare/IP
environment could not be set up, and take the appropriate action. If an NLM
could not be loaded, make sure that it is the proper version and see Resolving
File I/O Errors in the Traditional File Services Administration Guide.