User Guide

428 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-484: Warning: NWCONFIG has detected that no disk mirroring has
been configured. This is allowable, but not recommended, because disk mirroring is
an important part of full mirrored-server fault tolerance.
Source: NWCONFIG.NLM
Explanation: Disk mirroring is an important part of full mirrored-server fault tolerance.
Action: Before continuing with NWCONFIG, establish disk mirroring.
NWCONFIG-X-485: Warning: Some problems still exist with disk mirroring. Mirror
status description: description. These problems must be resolved before completing
the installation.
Source: NWCONFIG.NLM
Explanation: Some problems still exist with disk mirroring.
Action: Make sure the correct disk driver is loaded. Retry creating disk mirroring. If
the problem persists, contact a Novell support provider.
NWCONFIG-X-486: NWCONFIG.NLM tried to load the NLM_name to enable serve- to-
server communication but failed to do so for some unknown reason. It is not possible
now to copy files from a NetWare server.
Source: NWCONFIG.NLM
Explanation: Server-to-server communication, necessary for file copy, is not possible
unless the NLM indicated in the message is loaded.
Action: Try to determine from the console screen why the indicated NLM did not load.
If possible, fix the problem. Otherwise, contact a Novell support provider.
NWCONFIG-X-488: For the installation to continue, the current version of ICMD.NLM
is required to be loaded. NWCONFIG.NLM could not find a copy of the ICMD.NLM in
any of the NetWare boot partitions created, or the copies of the ICMD.NLM found in
the NetWare boot partitions were corrupted and hence not loadable. Installation
cannot continue.
Source: NWCONFIG.NLM
Explanation: The ICMD NLM must be loaded to continue the installation.
Action: Contact a Novell support provider.