User Guide

440 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
NWCONFIG-X-601, 602: API failed with code number.
Source: NWCONFIG.NLM
Explanation: A Media Manager call failed. There might be a hardware or driver problem,
or there might be an inconsistency between the partition table and the disk
geometry.
Action: Make sure drives are on line and drivers loaded. Look for disk or driver
problems. Try setting the server parameter Ignore Disk Geometry to On.
(Load MONITOR.NLM and select Server Parameters > Disk > Ignore Disk
Geometry.)
NWCONFIG-X-603: The attempt to set the preferred DS tree to name failed. The tree
could not be found.
Source: NWCONFIG.NLM
Explanation: An incorrect address or a LAN problem might be preventing the server from
seeing the tree.
Action: Make sure server and network addresses are correct. Troubleshoot the LAN.
NWCONFIG-X-606: The user name could not be found in the name tree.
Source: NWCONFIG.NLM
Explanation: The user object does not exist in the specified tree.
Action: The user's grace logins have probably expired. Reset the user's password.
NWCONFIG-X-607: The attempt to authenticate to server name by user name failed.
The most likely reason is that the server name is not in the name tree.
Source: NWCONFIG.NLM
Explanation: The specified server might not be in the tree, the user might not have used the
correct password, or a LAN problem could prevent authentication.
Action: Make sure the server is in the tree and the password is correct. To troubleshoot
server communication problems, see Unable to Communicate with Server, -
625 Errors in the Server Operating System Administration Guide.