User Guide

456 System Messages
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
Action: Refer to the documentation that came with the device to see if the device can
be made SCSI-2 compliant by setting the appropriate jumpers. If not, replace
the device with one that is SCSI-2 compliant.
NWTAPE.CDM: ERROR! Device name errored attempting to execute a command
command.
Source: NWTAPE.CDM
Explanation: There are problems with the hardware device that prevented it from executing
either a read or a write.
Action: Repair or replace the device.
NWTAPE.CDM: WARNING! Device has not been tested with driver_name. Driver will
attempt generic support. Use at your own risk!
Source: NWTAPE.CDM
Explanation: The driver has not been tested and certified by Novell.
Action: Contact the manufacturer to get a driver that fully supports the device and that
has been tested by Novell. However, if you want to use this driver, test it first
until you are satisfied that it supports the device adequately. Until then do not
use it to back up critical data.