User Guide

PSERVER Messages 477
System Messages
103-000150-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
PSERVER-X-18: There is insufficient memory for the print server to add an additional
printer.
Source: PSERVER.NLM
Possible Cause: The print server does not have enough available memory for another printer.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-19: The program cannot create client service processes.
Source: PSERVER.NLM
Possible Cause: The print server might not have enough available memory to initialize.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-20: All send buffers have been consumed.
Source: PSERVER.NLM
Possible Cause: A network communications error occurred, causing all the print server
communication buffers to be consumed without being freed.
Action: Until you can locate the communication problem, unload and reload the print
server to reinitialize its communication buffers.
PSERVER-X-26: The program cannot create the down monitor process.
Source: PSERVER.NLM
Possible Cause: The print server might not have enough available memory to initialize.
Action: Increase the memory available at the server. See Freeing Server Memory
Temporarily in the Server Operating System Administration Guide.
PSERVER-X-28: A bad process ID was passed to the kernel.
Source: PSERVER.NLM
Possible Cause: An internal print server error occurred.
Action: Until you can locate the problem, unload and reload the print server to
reinitialize its communication buffers.